Error Messages - Siemens SIMATIC S5 Series Manual

8

Error Messages

Error messages are displayed on the Display screen as follows: "No.: Device Name: Error Message (Error
Occurrence Area)". Each description is shown below.
Item
No.
Device Name
Error Message
Error Occurrence Area
Examples of Error Messages
"RHAA035: PLC1: Error has been responded for device write command (Error Code: 2[02H])"
• Refer to your External Device manual for details on received error codes.
• Refer to "Display-related errors" in "Maintenance/Troubleshooting Guide" for details on the
Error Codes Unique to External Device
Error Code
0x0A
0x0C
0x14
0x2A
0x32
0x34
0x36
GP-Pro EX Device/PLC Connection Manual
Error number.
Name of the External Device where an error has occurred. Device name is the title of the
External Device set with GP-Pro EX. (Initial value [PLC1])
Displays messages related to an error that has occurred.
Displays the IP address or device address of the External Device where an error has
occurred, or error codes received from the External Device.
• IP address is displayed as "IP address (Decimal): MAC address (Hex)".
• Device address is displayed as "Address: Device address".
• Received error codes are displayed as "Decimal [Hex]".
error messages common to the driver.
Parameter error
Definition error by data exchange process
Parameter error
Command (packet) error
Parameter error
Command (packet) error
Communication process error other than command (packet) error
DB/DX access error
Command (packet) error
Communication process error other than command (packet) error
Description
Error Description
19
SIMATIC S5 3964(R) Driver