Siemens SIMATIC S5 Series Manual page 13

4.2 Setup Items in Offline Mode
• Refer to the Maintenance/Troubleshooting guide for information on how to enter offline mode
• The number of the setup items to be displayed for 1 page in the offline mode depends on the
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in offline mode.
Touch the External Device you want to set from the displayed list.
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
GP-Pro EX Device/PLC Connection Manual
or about the operation.
Cf. Maintenance/Troubleshooting Guide "Offline Mode"
Display in use. Please refer to the Reference manual for details.
Select the SIO type to communicate with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial
interface specifications of the Display.
If you select an SIO type that the serial interface does not support, proper
operation cannot be guaranteed.
Refer to your Display manual for details on the serial interface specifications.
Select the communication speed between the External Device and the Display.
Display the data length.
Select how to check parity.
Select the stop bit length.
Select a communication control method to prevent transmission and reception data
overflow.
Setup Description
13
SIMATIC S5 3964(R) Driver
continued on next page