Siemens SIMATIC S5 Series Manual page 14

Setup Items
Timeout (s)
Retry
Wait To Send (ms)
Option
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device
you want to set from the displayed list, and touch [Option].
Setup Items
RI/VCC
• GP-4100 series, GP-4*01TM, GP-Rear Module, LT-4*01TM and LT-Rear Module do not
GP-Pro EX Device/PLC Connection Manual
Enter the time (seconds) for which the Display waits for the response from the External
Device, from "1 to 127"
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Enter the standby time (milliseconds) from when the Display receives packets until it
transmits the next command, from "0 to 255".
You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.
When connecting with the IPC, change RI/5V with the IPC changeover switch. Please refer
to the IPC manual for more details.
have the [Option] setting in the offline mode.
Setup Description
Setup Description
14
SIMATIC S5 3964(R) Driver