Page 2
In this charger, two batteries can be charged in different modes in various combinations. 1. Connect the USB type-C cable and USB power adapter, then the NP2 will be ready for charging. NP2 supports a variety of USB power adapters and automatically identifies and matches the input power.
Page 3
2. Insert batteries into the battery slot as shown below. The NP2 supports mixed charging of different types of batteries and can automatically identify and adjust charging parameters. NP-BX1 NP-BX1 NP-FZ100 NP-FZ100 Insertion diagram for NP-BX1 3. After correctly inserting a battery, the charger will beep and sound the prompt tone.
Page 4
4. To view detailed charging parameters for individual Battery Health Rating batteries, press the corresponding operate button to display the screen showing charging parameters and During charging, the charger will rate the battery according to battery status details as described below: the internal resistance of the battery, and the full score is five stars in white.After the charging cycle is complete, the charger will evaluate the health of the battery based on the electrical...
Page 5
ISDT official website: interface. The upgrade steps of NP2 smart charger are as follows: 1. Connect PC and NP2 with USB type-C data cable; 2. Start the firmware update program and update the firmware to NP2 according to the software guidelines;...
Need help?
Do you have a question about the NP2 and is the answer not in the manual?
Questions and answers