Yolink YS6802-UC/SH-18A User Manual page 16

Pairing
Find a smart switch as controller(Master). Hold the power button for 5-10 seconds,
the light will flash green quickly.
Find another action device as responder(Receiver). Hold the power/set button for 5-10
seconds, the device will enter pairing mode.
After pairing succeed, the light will stop flashing.
When the smart switch turns on, the responder will turn on as well. When the smart switch
turns off, the responder will turn off as well.
Unpairing
Find a controller(Master)
the power button for 10-15 seconds, the light
will flash red quickly.
Find a responder(
the power/set button for 10-15 seconds, the
device will enter un-pairing mode.
The above two devices will unpair by themselves
and the light stops flashing.
After unbundling, When the smart switch turns
on, the responder will no longer turn on. When
the smart switch turns off, the responder will no
longer turn off.
smart switch. Hold
Receiver ) action device. Hold
POWER BUTTON
14