Basic Playback Operation; Control Buttons For The Dome Camera Control Mode; Search Recorded Video By Time; Search Recorded Video By Event - XVision XH4DVRDVD Setup Manual

Control Buttons for the Dome Camera Control Mode:

1 Set / Go Preset
Toggle Hint
2
Screen
3 Iris Open
4 Iris Close

Basic Playback Operation

Search Recorded Video by Time:

•
Press SEARCH button to enter the Search menu.
•
Move the cursor to "From Time" and press ENTER will start playing recorded video from the
specified "From Time".
•
Move the cursor to "End Time" and press ENTER will start playing recorded video from the
specified "End Time".
•
Use Direction keys to move the cursor for setting the Start Time; adjusting the date and time
values by using the UP/DOWN keys. Press ENTER to confirm or ESC to abort.
•
Move the cursor to <Begin Playback> and press ENTER to start playing back the selected
video. Either press PLAY/STOP again or ESC to return to the live video screen.
NOTE: If there is no available recorded video that matches the specified time and date,
the unit starts to playback from the next available video.

Search Recorded Video by Event:

•
Press SEARCH button to enter the Search menu.
•
To search event video that was recorded on a specific camera, use LEFT/RIGHT keys to move
the cursor and press ENTER to select or de-select a channel.
•
Move the cursor to <Event List> and press ENTER to list the event video of the selected
channels.
•
The list displays each event by date, time, triggered camera and alarm type. The latest
recorded event video will be shown at the top of the list. To exit the event list, press ESC.
•
Use the UP/DOWN keys to scroll through the Event List. Press ENTER to play back the
selected event recording.
NOTE: The event list displays only the first 1024 events; as some events are deleted,
others are displayed.
5 Focus Far
6 Focus Near
7 Zoom Out
8 Zoom In
9 Pan / Tilt
Enter Dome Camera
10
Control Mode
11 Go Presets 1~6
12 Enter / Auto
13 ESC
5