XVision XH4DVRDVD Setup Manual

Package Contents
Inspect the packing carton and make sure the Xvision XH4/8/16DVRDVD is complete. Remove all
items from the box and make sure it contains the following items.
Xvision XH4/8/16DVRDVD
Function Keys on the Front Panel
1 Channels
2 MODE
3 PLAY/STOP
4 FREEZE
5 SEQ
6 SEARCH
7 MENU
8 COPY
9 Direction Keys
10 DOME
11 CALL
12 ENTER/ZOOM
13 ESC
00P5L5080YXEA2
Xvision XH4/8/16DVRDVD
Setup Guide
1. In Live and Playback modes, press any key to view the
corresponding video in full-screen.
2. In the input interface, keys 1-10 can be used for direct input of
numbers 0-9.
3. In Dome Camera Control mode, Press 1 to enter the Set/Go preset
menu; 2 to hide or display the dome setting parameters; 11-16 is for
quick access of preset points 1-6.
Press this key to view either full-screen or multi screen modes.
Press once to start the playback of recorded video. Press again to exit.
Press this key to freeze the current viewing screen.
Press this key to start automatic sequence display of cameras.
Press this key to search recorded video by date/time or event.
Press this key to enter the OSD setup menu.
This key is used for selecting recordings in the Xvision ezBurn™
function.
1. In Zoom mode, these keys function as direction keys.
2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press the UP / DOWN keys.
Press this key to enter the Dome Camera Control mode.
Press this key to enter the Call Monitor Control mode. (8&16 Channel
models only)
1. In the OSD menu or selection interface, press these keys to make
the selection or save the settings.
2. In live full screen viewing mode, press this key to view a 2x zoom
image; press it again to return to live viewing.
Press this key to cancel or exit from various control modes.
Power Power
Adaptor Lead
User's
Manual
1