Led Signals; Steam Cleaning - Kruger KGV8000 Instruction Manual

Steam cleaner with detergent and hydrojet function

Table of Contents

Available languages

4 LED SIGNALS

Activation of detergent function;

2. Lack of detergent warning ;

3. Activation of jet function;

4. Speed 1 steam;

5. Speed 2 steam;

6. Speed 3 steam;

7. No water/jet alarm;

8. Steam ready

When the tank is empty, the alarm "LACK OF WATER/HYDROJET" switches on, the pump and the

solenoid valves can not operate until the tank is filled properly. To do so you need to turn off the

machine through the green switch on the front panel, unscrew the cap and fill the water tank, then

restart the machine which will play the normal startup routine.

CAUTION: If there is no water in the tank the machine will not immediately activate the alarm,

but it will do so after 15 seconds (Time required for necessary tests).

In the condition of tank with water the buzzer does not sound and the pump, if necessary, starts

to operate. The water is pumped from the tank to the boiler, the operation of the pump is audible

as a continuous noise.Water is pumped from tank to the boiler and the pump can be heard as a

continuous drone.

When the water level in the boiler touches the probe, the pump stops and the resistance is fed.

- Perform the preparatory operations described in par. 3

- Insert the flexible hose's plug (21) (Fig. 6) in the socket (13) (Fig. 2) and make sure it's properly fitted

by pulling slightly at it.

- Fit the desired steam cleaning accessory (directly to the flexible hose and/or to the extension

hoses).

To adjust the steam function it is necessary to turn the nut to positions 1-2-3 and then press the

trigger underneath the steam hose handle.This way it is displayed on the front panel the selection

of steam control. The steam flows through the solenoid valve when the gun trigger is pressed. With

hydrojet or detergent function activated, the adjustment of the steam is not permitted, and it is

automatically set to the second speed.

The machine can deliver steam only if there is water inside the tank, if during the use the water level

Table of Contents