Clock/Timer
Viewing clock
The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
●
Press CLOCK•TIMER (or CLOCK on the
remote control).
➜
The clock is displayed for a few seconds.
➜
If the clock has not been set, "--:--" is
displayed.
Clock setting
The clock can be set in 24-hour mode.
1
In standby or view clock mode, press
CLOCK•TIMER (or CLOCK on the remote
control) once. In other source mode, press
CLOCK•TIMER (or CLOCK on the remote
control) twice.
2
Press ALBUM -/+
hour.
3
Press TITLE -/+ ¡ / ™ repeatedly to set the
minute.
4
Press CLOCK•TIMER (or CLOCK on the
remote control) again to store the setting.
➜
The clock starts working.
24
5 6
repeatedly to set the
To exit without storing the setting
●
Press STOP 9 on the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 10 seconds, the system will exit clock setting
mode automatically.