Table of Contents
Advertisement
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
To activate the demonstration
●
In standby mode, press and hold 9 on the
system for 3 seconds to switch to
demonstration.
To deactivate the demonstration
●
Press and hold 9 on the system for 3 seconds to
switch to standby mode.
Switching the system on
In standby/demonstration mode
●
Press STANDBY ON/B to switch to the last
selected source.
●
Press CD, TUNER, USB or AUX.
●
Press OPEN•CLOSE, DISC 1/2/3(CD 1/2/
3), DISC CHANGE.
➜
The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
●
Press and hold 9 on the system.
In any other source mode
●
Press STANDBY ON (or B on the remote
control).
➜
The clock will appear on the display when
the system is in standby mode.
Basic Functions
Dim mode
You can select the desired brightness for the
display.
●
In any source mode, press DIM on the remote
control repeatedly to select DIM 1, DIM 2, DIM 3
or DIM OFF display mode.
➜
is shown, except for DIM OFF mode.
DIM
Volume control
Adjust MASTER VOLUME to increase (turn
knob clockwise or press VOLUME +) or
decrease (turn knob anti-clockwise or press
VOLUME -) the sound level.
To listen through the headphones
●
Connect the headphones plug to
the n socket at the front of the
system.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTE" is displayed.
●
To restore the volume, press MUTE again or
increase/decrease the volume level.
13
Advertisement
Table of Contents
