External Audio Sources - Blaupunkt Arizona DJ70 Operating Instructions Manual

Instead of the CD-changer, you can connect
an external audio source with line output.
Such sources might be a portable CD player,
a MiniDisc player or an MP3 player.
The AUX input must be switched on in the
menu.
You need an adapter cable to connect an ex-
ternal audio source. You can obtain such a
cable from your Blaupunkt dealer.
Press the MENU button, 8.
button, 7, as often as is
Press the
necessary for "AUX OFF" or "AUX ON"
to appear in the display.
If "AUX ON" is displayed, the input has al-
ready been switched on.
Press the or
to switch AUX on or off.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Note:
If the AUX input is switched on it can be se-
lected with the CDC button, =.
56
buttons, 7, in order
TMC means "Traffic Message Channel".
TMC is used to transmit traffic announce-
ments digitally, and can therefore be used for
route planning by suitable navigation systems.
Your car radio has a TMC output that can be
connected to Blaupunkt navigation systems.
Your Blaupunkt dealer can tell you which nav-
igation systems can be used with your car
radio.
If a navigation system is connected and a
TMC station is received, TMC will light up in
the display.