Lexing LX-PR-65S Instruction Manual

LX-PR-65S Infrared Sensor Instruction
Summary
External passive infrared detector fully adjustable vertically and horizontally, activated by small

movements of heat.
Timer adjustable from 20sec to 12min.(reactived by the last detected movement.)

Detection range 12m with 110 degree field of view.

Override switching facility to enable permanent ON operation of light.

Light sensor adjustable to inhibit operation during daylight if required.


Specifications

1. Power source: 220-240V/AC
100-130V/AC
2. Power frequency: 50/60Hz
3.Time setting: 20sec to 12min±2min
4. LUX night and day adjustments
Sensor information
Planning your installation
First decide on the location bearing in mind that the detector will perform best if mounted between 2 and 2.5
meters from the ground. It is also important to remember not to position the detector where it will reach areas
such as footpaths and roads as this may result in unwanted activations from passers by.
The detector responds better when a person moves across the field of vision as opposed to straight towards
it. Mounting the detector towards the side of a building with the head angles at 45 degree will make the
detector respond better than mounting in the center looking straight ahead.
The detector cannot see through solid objects including glass so care should be taken that field of view is not
obstructed by trees bushes parked cars etc.
76mm
5. Rated load: 1000W Max.(220-240V/AC)
6. Detection range: 12m with 110 degree field of view
7. Working temperature: -10~+40°C
8. Working humidity: <95℅RH
12m
Correct moving orientation
123mm
500W Max.(100-130V/AC)
Detection angle
100mm
110°