Advertisement
Quick Links
Microwave Sensor LX-MV360S2-IR instruction
Specifications
Power source:220-240V/AC
Power frequency:50/60Hz
Rated load:1200W Max. (220VAC tungsten cosφ=1)
150W Max. (220VAC fluorescent cosφ=0.5)
Installation height: 2.5~3.5m (ceiling mounting)
HF system:5.8GHz CW electric wave，ISM band
Transmission power:<0.2mW
:
NOTE
the high-frequency output of this sensor is
<0.2mW- that is just one 5000 of the transmission
power of a mobile phone or the output of a
microwave oven.
Sensor information
Height of installation2.5~3.5M
Utilizing field and introduction
LX-MV360S2-IR is a moving object sensor that can detect range of 360°and it's working frequency is
5.8G.The advantage of this product is stable working state (stable working temperature: -15°C~+70°C),
LX-MV360S2-IR adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs
better than infrared sensor.
th
Max:8m
Sensing distance adjustment range
42.00mm
Detection angle:360°
Detection range:1.5-8m（radii.）(adjustable)
Detection motion speed: 0.5~1.2m/s
Time setting:8sec to 12min (adjustable)
Light-control:10~>1000LUX (adjustable)
Standby power:approx.0.9W
Working temperature:-15°C~+70°C
Transmission power<0.2mW
Max:8m
Min:1.5m
Min:1.5m
42.00mm
360º
Sensing angle adjustment range
Advertisement
Related Manuals for Lexing LX-MV360S2-IR Series
Summary of Contents for Lexing LX-MV360S2-IR Series
- Page 1 Microwave Sensor LX-MV360S2-IR instruction 42.00mm 42.00mm Specifications Power source:220-240V/AC Detection angle:360° Power frequency:50/60Hz Detection range:1.5-8m（radii.）(adjustable) Rated load:1200W Max. (220VAC tungsten cosφ=1) Detection motion speed: 0.5~1.2m/s 150W Max. (220VAC fluorescent cosφ=0.5) Time setting:8sec to 12min (adjustable) Installation height: 2.5~3.5m (ceiling mounting) Light-control:10~>1000LUX (adjustable) HF system:5.8GHz CW electric wave，ISM band Standby power:approx.0.9W...
- Page 2 It can be installed inside of product that is made of glass and plastic because that these materials make little effect to microwave. Connect the product as shows below; you can change a common light to an automatic light. The intelligent lighting system AC Power L’...
- Page 3 LX-MV360S2 sensor. Microwave sensors LX-MV360S2-IR induction distance will change according to the detection target's movement speed , According to the different of moving speed ,LX-MV360S2-IR series, have LX-MV360S2-IR-S ( slow moving ), LX-MV360S2-IR-M ( medium mobile ), LX-MV360S2-IR-H ( fast moving ) three corresponding product available.
-
Page 4: Time Setting
Installation height: (ceiling mounting) Detection motion speed (m/sec) The picture are just for reference Mounting height is different,the induction distance will change. Move at different speeds,the induction distance will change. In different cases, the sensitivity of the lights has certain deviation. When use this product, please adjust the sensitivity to an appropriate position you need, please do not adjust the sensitivity to maximum, to avoid the product does not work normally caused by wrong motion.Because the sensitivity is too high easily... -
Page 5: Special Function
Note: please don’t adjust the three functional buttons to excess. That is because the three functional buttons were connected to the components directly, there is a small stopper in each of the three components, when you adjust the buttons from start to end, the excessive turn will damage the stopper，and lead to the 360°non-stop turn around. -
Page 6: Troubleshooting
Friendly reminder. Please avoid installing sensor in lamps. In the case of light-off, the remote control distance is enough, but when light on, users fail to turn light off at the same distance as turning light on, because the light-ray to the PIR detector will shorten the remote control distance obviously.
Need help?
Do you have a question about the LX-MV360S2-IR Series and is the answer not in the manual?
Questions and answers