Mark Functions; Using Mark Functions; Adding Marks; Moving Between Marks - Tascam 24 Owner's Manual

Marks can be used to cue for playback, for example.
In addition to use with this unit, mark information added to WAV
files can be used with software, for example, that supports the
BWF format.
NOTE
The mark function cannot be used with songs created on a
Model 24 running firmware version 1.32 or older.

Using mark functions

In order to set and clear marks, the Home Screen F4 button
function must be switched from
1.
On the SYSTEM Screen, select KEY FUNCTION to open the
KEY FUNCTION Screen. (See "Menu operation procedures"
on page 28.)
2.
Press the MULTI JOG dial to open the F4 KEY Screen.
3.
Turn the MULTI JOG dial to select MARK.
4.
Press the MULTI JOG dial to confirm the setting.
The KEY FUNCTION Screen reopens.
NOTE
When the F4 button function has been changed, the
built in effect can be turned on/off with the F3
on the EFFECT Screen. (See "Using the built-in effects" on
page 38.)
to .
button

8 - Mark functions

Adding marks

When playing or recording, press the F4
mark at the current point.
When a mark is added, a pull-up showing the mark number
appears at the bottom of the display.
Mark icons appear below the playback position bar where
marks are set.
0 The [ xx ] in the mark name is a number given to all marks
that is incremented in order.
0 Marks added during recording will automatically be saved in
the song when recording stops.
0 Marks added during playback will not be automatically
saved. Save song information after stopping playback to save
mark data. (See "Saving the current song" on page 33.)
NOTE
If an icon appears at the beginning of a song name, it has
unsaved mark data. Save the song information to save the
mark data. (See "Saving the current song" on page 34.)

Moving between marks

When stopped, paused or playing back, press the m or ,
button to move (skip) to the previous or next mark.
When skipping, the mark name appears in a pull-up at the
bottom of the display.

Clearing individual marks

Marks can be cleared when stopped or paused.
1.
Skip to a mark that you want to delete when stopped or
paused. (See "Moving between marks" on page 45.)
2.
Press the F4
button to open the Mark Clear confirma-
tion screen.
3.
Press the F4 button to clear the mark.
NOTE
1 3
i Repeat steps - to clear multiple marks.
i To clear all marks in the current song, select the CLR ALL
MARKS item from the menu list shown on the SONG Screen.
(See "Clearing all marks" on page 33.)
button to add a
45
TASCAM Model 24