Input Amplifier Setting; Selection Of Remote Power Supply Voltage - Triax TMB 100 Manual

Pregrammable Amplifier
TMB 100, 100-1 & TMB 100S

Input amplifier setting.

 Unit in standby mode, push a button to reach the CONFIG menu.
 Press the enter button to select the Comb menu.
 Press the  button to reach the AmpX menu.

Press enter to activate the menu

Press the buttons + or - to change the configuration of the UHF input amplifiers (on/off)

Confirm by pressing enter

Selection of remote power supply voltage.

<CONFIG>
Enter
2x
CONFIG
Comb 0010
Enter
CONFIG
Comb 0010
Enter
 Unit in standby mode, push a button to reach the CONFIG menu.
 Press the enter button to select the Comb menu.

Press the  button 2 times to reach Vdcx menu.

Press the enter to activate the menu

Press the buttons + or - to select the Voltage (12 or 24 VDC)
CONFIG

Confirm by pressing enter
Vdc 12V
Enter
CONFIG
Vdc 12V/24V
Enter