Adjusting The Volume; Setting The Power-On Volume - Blaupunkt ALICANTE CD32 Operating Instructions Manual

SWITCHING ON/OFF
Switching on by inserting a CD
If the unit is switched off and there is no
CD inserted in the drive,
Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
The CD will be drawn automatically into
the drive.
You must not hinder or assist the drive
as it draws in the CD.
The unit switches on. CD playback be-
gins.
30

ADJUSTING THE VOLUME

Adjusting the volume
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
To increase the volume,
turn the volume control 3 to the
right.
To decrease the volume,
turn the volume control 3 to the
left.

Setting the power-on volume

You can set the default volume at which
the unit switches on.
Press the MENU button 7.
Keep pressing the
5 until "ON VOL" appears in the
display.
Set the power-on volume using the
buttons 5.
and
To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.
If you change the setting to "LAST VOL",
the power-on volume will be the same
as the volume level that was set before
the unit was last switched off.
Note:
To protect your hearing, the maxi-
mum power-on volume that can be
set for "LAST VOL" setting is "38".
If the volume was higher before the
unit was switched off and "LAST
VOL" was selected, the volume will
be set to "38" the next time the ra-
dio is switched on.
or button