Table of Contents
Advertisement
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
Hold down the MENU button 7 for
longer than two seconds.
Note:
You can set the scantime. For fur-
ther details, read the section enti-
tled "Setting the scantime" in the
"Radio mode" chapter.
Stopping SCAN and continuing
playback
To stop scanning,
briefly press the MENU button 7.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
If you want to repeat a track,
press button 4 (RPT) :.
RPT appears in the display. The track is
repeated until you deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
press button 4 (RPT) : again.
RPT disappears. Normal playback is
then continued.
Pausing playback (PAUSE)
Press button 3 ( ) :.
"PAUSE" appears in the display.
Cancelling pause
Press button 3 ( ) : while in
pause mode.
Playback is continued.
Changing the display
To switch between the track number dis-
play and the track number / playing time
display,
Press the MENU button 7.
Keep pressing the
5 until "CD DISP" appears in the
display.
button 5.
Press the
The current setting is displayed. "TIME"
for the playing time display and "PLAY"
for the track number display.
button 5 to select the
Press the
required setting.
Press the MENU button 7 twice.
Removing the CD from the unit
To remove the CD from the unit,
keep the SRC
pressed until the CD is ejected.
CD MODE
or
button
button 6
39
Hide quick links:
Advertisement
Table of Contents
