Switching On/Off - Blaupunkt ALICANTE CD32 Operating Instructions Manual

Radio / cd
Hide thumbs Also See for ALICANTE CD32:
Table of Contents

Advertisement

THEFT PROTECTION
First, pull the control panel straight
off the unit and then out towards
the left.
The unit switches off after the con-
trol panel is removed.
All the current settings are saved.
Any CD already inserted in the unit
remains there.
Attaching the control panel
Slide the control panel from left to
right into the unit's guide.
Press the left-hand edge of the
control panel into the unit until it
clicks into place.
Note:
When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, CD, CD
changer/Compact Drive MP3 or AUX)
when the panel is replaced.

SWITCHING ON/OFF

Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle's ignition and it was not switched
off using button 2, it will switch on/off
simultaneously with the ignition.
You can also switch the unit on even if
the ignition is off:
To do so, press button 2.
Note:
To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
Switching on/off using the
removable control panel
Remove the control panel.
The unit switches off.
Attach the control panel again.
The unit switches on. The settings (ra-
dio, CD, CD changer/Compact Drive
MP3 or AUX) that were set before the
unit was switched off will be reactivat-
ed.
Switching on/off using button 2
To switch the unit on, press button
2.
To switch the unit off, press button
2 for longer than two seconds.
The unit switches off.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents