Place the furniture door with the outer
side downwards on a stable surface.
Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door .
Hang the fixing bracket with the
fitting aids onto the inside of the
furniture door. Align the fixing bracket
centrally.
Attach the fixing bracket securely
using at least 6 short chipboard
screws . (On cassette doors only
use 4 screws on the edges).
Tip: Pre-drill the holes.
Pull the fitting aids upwards to
remove them .
Turn them around and fit them into
the middle slots on the fixing bracket
for safe keeping.
Slide the side cover onto the fixing
bracket on the side opposite the
hinge.
Turn the furniture door over and
attach the handle (if required).
Installation
71