Cake Kalk& Manual page 8

Changing Brake mode
When the bike has been activated. Press the button middle right to
change Brake mode. You will always change the Brake mode, starting
from "1 – No brake" to "2 – Medium brake" to "3 – Hard brake" and back
to "1 – No brake" again, one press at a time. The bike will make a diffe-
rent sound depending on the selected riding mode.
WARNING: When riding in traffic and utilizing the brake mode, the braking
light will not be activated and alarm other in traffic that you are slowing
down. Use with caution and always use the real brakes as a mean to stop
your bike when riding.
Change between Miles per hour and Kilometers per hour
When the bike has been activated. Press and hold middle left button on the
display in order to change between Mph and Kmh.
Start and Cancel the tripmeter
When the bike has been activated. Press and hold middle right button in
order to start a new trip, or to cancel your current trip.
See information about the software and bike information
When you are starting the bike and the display is loading. When you get
to the screen "Press to start", press and hold the button on the right side
of your display to access this information. This can be useful in service and
maintenance.
Brake modes
You can put the bike into 3 different Braking modes.
Ranging from a freewheel experience that keeps you rolling after you release
the throttle, to a harder motor brake that deaccelerates you slowly as you
release the throttle. All braking power is regenerated back into the battery
for extended range.
Brake mode 1
No motor brakes. Gives the same sensation as riding a bike, perfect for
mellow riding and the ultimate freedom experience.