Owning And Operation; Maintenance; Cleaning; Storing - Cake Kalk& Manual

Slide the seat on and make sure that the metal tongue gets full contact
with the pin without any cables getting in the way. Before screwing on the
2 bolts in the rear seat, make sure that the seat has good contact with the
carbon frame, both in the front and on the side.

5. Owning and Operation

5.1 Maintenance

It's important to keep the bike in good condition in order to get the full
performance of the bike and increase its lifetime. When you are done riding,
always clean the bike and follow the "regular inspection" checklist. Charge
the bike to a minimum of 30% State Of Charge. Turn the bike off with the
main switch if it will not be used for more than a week.

5.2 Cleaning

Always be cautious when cleaning the bike. The bikes electrical
components can be damaged if cleaned improperly which can damage
the bike, property or people.
Always make sure that the bike is standing firmly before washing and don't
forget to turn the bike off.
Never use a pressure washer or a water hose in order to clean the bike.
It's recommended to use pressurized air, a bucket of water together with
a cloth and brush. When cleaning the chain, use a chain cleaner and scrub
the chain with a brush. Repeat the cleaning before drying the chain and
apply chain lube.

5.3 Storing

Follow these following steps to ensure that your CAKE Kalk& is always in a
good condition and to extend the life of the bike. We recommend you to
ride the bike at least once every month as some of the bike's components
needs to be used in order for them to be in the best condition. Store the