Kenwood KM260 Series Instructions Manual page 7

electronic speed sensor control
Your mixer is fitted with an electronic speed sensor control that is designed to maintain the
speed under different load conditions, such as when kneading bread dough or when eggs are
added to a cake mix. You may therefore hear some variation in speed during the operation as
the mixer adjusts to the load and speed selected - this is normal.
to fit and use the splashguard
1 Fit the bowl into the base and add the ingredients.
2 Fit the tool then lower the mixer head
3 Fit the splashguard onto the bowl by sliding the cut away
section around the mixer head
4 To remove the splashguard reverse the above
procedure.
G During mixing, ingredients can be added
directly to the bowl via the chute.
.
6