Idis DA-CM1100 Installation Manual

DA-CM1100 INSTALLATION MANUAL
Mounting
Mount the bracket to the ceiling as follows:
1
Insert cables from external devices, network and
power adapter through the hole of bracket.
2
Mount bracket to the ceiling by using the anchors
and screws.
3
Screw the plate to bracket by using the screws.
This manual is intended for users of the DA-CM1100 ceiling mounting
bracket. It includes instructions for mounting the DA-CM1100 ceiling
mounting bracket to a ceiling.
• This bracket is intended to be used with DC-D series
model of camera. Do not use it with other models of
cameras.
• This installation should be performed by a qualified
service personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not
strong enough to support the camera, the camera may
fall.
• Do not use this product for other purposes.
Bracket
Bracket
Plate