Table of Contents
Advertisement
Inserting batteries into the
Remote Control
1
Open the battery cover.
2
Insert batteries with the correct polarity as
indicated by the + and - symbols inside the
battery compartment.
3
Close the cover.
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly and
kept away from children.
Using the Remote Control
Direct the remote control at the remote sensor
of the DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near extremely
hot or humid place.
Do not spill water or put anything wet on the
remote control.
NTSC/PAL Conversion
This player is equipped with a NTSC/PAL
conversion feature to convert the video output
of the disc to match your TV system. The
conversions supported are as below:
Disc
Type
Format
DVD
NTSC
PAL
VCD
NTSC
PAL
DVD Q30 English IFU
"
-
+
+
-
Output format
Selected mode
NTSC
PAL
AUTO
NTSC
PAL
NTSC
PAL
PAL
NTSC
NTSC
PAL
NTSC
NTSC
PAL
PAL
9
«
Notes:
– AUTO can only be selected when using a TV
that has both the NTSC and PAL systems.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format is
most suitable for the best picture quality.
Display on Front Panel
Various icons will appear on the front panel
display depending on the current status of the
player.
DVD Q30 IFU for /751
2000.12.20, 11:45 AM
Preparation
9
3141 016 19001
Advertisement
Table of Contents
