Test Tone; Pro Logic Setup; Spdif Setup; Spdif Out Setup - Philips TW-DVDQ30/SKD Owner's Manual

Setup Menu

Test tone

This item is used to check the connection of the
audio system. When TEST TONE is ON, a fizzy
sound from every speakers will appear.
Press the 34 keys to highlight the TEST TONE
1
item.
2
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
3
Move the cursor by pressing the 34 keys to
4
highlight the selected item.
ON: Enable test tone.
OFF: Disable test tone.
5
Press OK.
Press the 1 key and return to the SPEAKER
6
SETUP menu.

Pro Logic setup

This item is used for settings on Dolby Pro Logic
signals.
1
Press SYSTEM MENU to enter the SETUP menu.
Press the 34 keys to choose
2
the PRO LOGIC SETUP menu.
3
Press OK to enter.
Press the 34 keys to highlight the PRO LOGIC
4
item.
5
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
6
Move the cursor by pressing the 34 keys to
7
highlight the selected item.
ON: Output the Dolby Pro Logic signals.
OFF: Forbid the Dolby Pro Logic signals to
send output.
AUTO: Whether PRO
LOGIC is ON or OFF, it
depends on the audio format of
the disc you playback.
8
Press OK.
Press the 1 key and return to the SPEAKER
9
SETUP menu.
Press the 34 keys to highlight the MAIN PAGE
10
and confirm by pressing OK.
18
DVD Q30 English IFU
"
18
«

SPDIF setup

In this menu, you can set up digital audio format
outputing from coaxial and
optical terminals.
1
Press SYSTEM MENU to enter
the SETUP menu.
Press the 34 keys to choose the SPDIF SETUP
2
menu.
3
Press OK.
NOTE:
SPDIF is the abbreviation of Sony Philips Digital
Interface which is a protocol of digital data
transfering.

SPDIF OUT setup

Press the 34 keys to highlight the SPDIF OUT
1
item.
2
Press OK to open its submenu.
3
Enter its submenu by pressing
the 2 key.
Press the 34 keys to highlight
4
the selected item.
RAW: Original digital signals output.
PCM: Convert to PCM signals to output.
5
Press OK.
Press the 1 key and return to the SPDIF SETUP
6
menu.

LPCM 96K mode

In this menu, you can set up sampling rate to
decode LPCM audio.
Press the 34 keys to highlight the LPCM 96K
1
item.
2
Press OK to open its submenu.
3
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
4
highlight the selected item.
ON: Detect the loading disc for appropriate
sampling rate.
OFF: The decoding process is under the
sampling rate of 48KHz.
5
Press OK.
Press the 1 key to return to the SPDIF SETUP
6
menu.
DVD Q30 IFU for /751
2000.12.20, 11:45 AM
3141 016 19001