Table of Contents
Advertisement
Video Out Setup
There are items included in VIDEO OUT PAGE
menu as TV DISPLAY, VIDEO OUTPUT, TV TYPE
BLACK LEVEL, VIDEO MODE, BRIGHTNESS,
CONTRAST, SATURATION, HUE.
1
Press STOP twice.
2
Press SYSTEM MENU to enter its menu.
3
Highlight the VIDEO OUTPUT SETUP item by
pressing the 34 keys.
4
Press OK.
Video output
In this menu, you can select the video output for
high quality picture.
Press the 34 keys to highlight VIDEO OUTPUT
1
in the VIDEO OUTPUT SETUP menu.
2
Press the OK key to open its submenu.
Press the 2 key to highlight the item of the
3
submenu.
Press the 34 keys to choose
4
an item.
S-VIDEO: Video signals will send an output
from the S-VIDEO on the rear panel of the DVD
player.
YCBCR: If your TV set is equiped with Y/CB/
CR input, you can choose for high quality picture.
5
Press OK.
Press the 1 key to return to the GENERAL
6
SETUP menu.
NOTE: Any selection will not influence the signal
output of composite video.
TV display
Select the aspect ratio of the TV to be
connected.
16:9
when you connect a wide-screen TV to
the DVD player.
4:3 LETTER BOX
normal TV to the DVD player. Displays a wide
picture with bands displayed on the upper and
lower portions of the TV screen.
4:3 PAN SCAN
normal TV to the DVD player. Displays the wide
picture on the whole TV screen with a portion
automatically cut off.
DVD Q30 English IFU
"
when you connect a
when you connect a
19
«
16:9
4:3
Letter Box
4:3
Pan Scan
Setup the item as follows,
Press the 34 keys to highlight the TV DISPLAY
1
item in the GENERAL SETUP menu.
2
Press the OK key.
3
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
4
highlight the selected item.
5
Press OK.
Press the 1 key to return to the GENERAL
6
SETUP menu.
TV type
Before viewing the DVD or VCD, ensure that the
PAL or NTSC setting of the system matches your
TV set.
Press the 34 keys to highlight
1
TV TYPE in the GENERAL
SETUP menu.
2
Press OK.
Enter its submenu by pressing the 2 key.
3
Move the cursor by pressing the 34 keys to
4
highlight the requisite item.
5
Press OK.
Press the 1 key to return to the GENERAL
6
SETUP menu.
NOTE: Choosing NTSC item indicates that the
player will output by NTSC system, Similarly, you
can sacquire PAL system by choosing the PAL item.
And the item MULTI means video output is
depending on the format of DVD or VCD discs.
DVD Q30 IFU for /751
2000.12.20, 11:45 AM
Setup Menu
19
3141 016 19001
Advertisement
Table of Contents
