Laser Classification; Electromagnetic Compatibility - Flex ALC 2-F Operating Instructions Manual

393.738_ALC2-F.book Seite 9 Donnerstag, 25. Juni 2015 12:13 12
Identification on the device
Caution!
Laser radiation. Do not stare into beam.
Maximum output power < mW, Wavelength
630–650 nm, Class 2 laser product (according
to DIN EN 60825-1:2001-11)

Laser classification

The device complies with laser class 2, based
on the standard IEC 825-1/EN 60825.
The eye is protected by the lid closure reflex
if somebody accidentally glances into the laser
beam. However, this lid protection reflex may
be impaired by medication, alcohol or drugs.
These devices may be used without further
protective measures if it can be ensured that
no optical instruments reduce the cross-section
of the beam.
Do not aim laser beam at people.

Electromagnetic compatibility

Even though the device satisfies the strict
requirements of the relevant directives, the
possibility cannot be excluded that the device
– will disrupt other devices (e.g. aircraft navi-
gation systems) or
– will be disrupted by powerful radiation,
possibly resulting in a wrong operation.
In these cases or other uncertaintities, check
measurements should be carried out.
For your safety
Intended use
This cross-line laser is designed for commercial
use in industry and trade.
The device is designed to determine, transfer
and check right angles on floors.
The device is not suitable for the vertical
alignment of walls.
FLEX ALC 2–F
9