Technical Specifications; Disposal Information - Flex ALC 2-F Operating Instructions Manual

393.738_ALC2-F.book Seite 12 Donnerstag, 25. Juni 2015 12:13 12
FLEX ALC 2–F

Technical specifications

Cross-line laser ALC 2–F
Visible laser diode
Laser class
Work area
Precision
Power supply
Operating duration
Temperature range
– for operation
– for storage
Weight (with batteries)
Instructions for use
The most important operating steps are
explained at the end of these instructions
on the illustrated pages.
See from page 124.
12
Checking precision
It is recommended to check the device regularly
to ensure that it is always precise.
If the precision deviates from the permitted
635–670 nm
tolerance range, the device must be taken
to a customer service workshop authorised
2
by the manufacturer.
Have the device adjusted by authorised
± 20 m
technicians only.
± 2 mm/6 m
The steps required to check the precision
are explained at the end of these instructions
3 x LR6/AA
on the illustrated pages.
See from page 130.
≤ 10 h

Disposal information

–10 °C–51 °C
–20 °C–70 °C
1.09 kg
In accordance with the European Directive
2012/19/EC on Waste Electrical and Electronic
Equipment and transposition into national law
used electric power tools must be collected
separately and recycled in an environmentally
friendly manner.
EU countries only:
Do not throw electric power tools into
the household waste!