Cleaning And Care; Technical Specifications - Vitek VT-3592 BK Manual Instruction

the jack (10). Set the desired vol-
ume level using the buttons (6)
«VOLUME». When connecting the
earphones the radio speaker will be
switched off automatically.
ATTENTION! Do not set high vol-
ume while using the earphones. To
prevent impairment of hearing when
listening to the radio via the ear-
phones do not set too high volume,
the experts advise not to listen to
the radio at a high volume for a
long time.

CLEANING AND CARE

•
•
•
•
•
M VT-3592_105x148.indd 7
Clean the radio body with a soft,
slightly damp cloth and then wipe
it dry.
Never use abrasives or solvents.
Do not immerse the power cord,
the power plug or the radio itself
into water or other liquids.
Remove the batteries if you are
not planning to use the radio for
a long time.
Keep the radio away from children
in a dry cool place.
DELIVERY SET
Radio – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Supply voltage: AC: 220 V ~
50 Hz/DC: 4.5 V - 3 UM-2 batteries
(not supplied)
Power consumption - 3.5 W
Frequency range: FM 64-108 MHz
Power output – 0.8 W
Speaker impedance – 8 O
The manufacturer reserves the right
to change specifications of the unit
without a preliminary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee con-
ditions can be obtained from the
dealer from whom the appliance was
purchased. The bill of sale or receipt
must be produced when making any
claim under the terms of this guar-
antee.
This product conforms to the
EMC Directive 2014/30/EU
and to the Low Voltage
Directive 2014/35/EU.
7
ENGLISH
07.07.2017 15:28:56