Page 3
1. Avoid fierce lash, or falling into the ground. 2. Do not put the radio in the place where is under sunshine, hot or humid. 3. Keep magnetic tape, magnetic card and other magnetic record software away from the speaker, in order to avoid that the record is erased or there is noise in the magnetic tape.
Page 4
1. Move the Power switch (2) to the position of ON, the radio begins to work. Move the Power switch (2) to the position of OFF, the radio is turned off, the time displays on the display screen. 2. Turn the Volume control (18) to adjust to the optimum volume. 3.
Page 5
6. When the received station is correct and station signal is strong, the Tuning Indicator (3) lights up. 7. In order not to affect others, you can use earphone to listen to the radio. Plug the earphone into the Earphone Socket (19) (the speaker inside the radio disconnects automatically), and you can use earphone to listen to the radio.
Page 6
clock time. Reset from the beginning Set the power switch to the position of OFF, the time appears on the display screen. After installing the batteries, the "0:00" appears on the display screen, it means that the time system in use is 24 hours. The "12:00" appears on the display screen, it means that the time system in use is 12 hours, and the PM means afternoon time.
Page 7
hour's listening, the radio will automate to be turned off (the power switch is set to the position of OFF). In the state of clock, press the Sleep timing turn off button (10), the symbols of " " and "0:59" display on the display screen, and you can receive FM band program.
Need help?
Do you have a question about the VT-3588 and is the answer not in the manual?
Questions and answers