Use The Detector - Fluke PLS SLDR User Manual

SLDR, SLDG
Users Manual

Use the Detector

Use the Detector and a laser level to identify new level and grade marks.
To identify new level and grade marks:
1. Put the bottom of the laser level on a stable surface or tripod.
2. Connect the Detector to a measuring rod or staff.
3. Turn on the laser level and the Detector and direct the laser beam toward the laser reception window of the
Detector. See Figure 2.
4. Move the Detector up and down the rod until the laser level on the LCD indicates the Detector is level with the
laser beam. If the beeper is on, the Detector also emits a solid output signal when the Detector is level with
the laser.
5. Secure the Detector to the rod and take measurements as needed.
6
Figure 2. Level and Detector
OK
OK
OK
OK