Fluke PLS SLDR User Manual page 8

SLDR, SLDG
Users Manual
Item
J
Offset notch
K
Vertical rod clamp screw thread
L
Vertical clamp guide
M
Rear LCD
N
Battery door
O
Rod clamp screw
P
Alignment point
Q
Reference indicator
R
Clamp screw knob
Table 3 lists the functions on the Control Panel.
1
7
6
6
4
Table 2. Features (cont.)
Description
Table 3. Control Panel
Item


2

3
D
E
4
F
5
G
Use to transfer reference marks 53.18 mm from the edge of
the detector.
Accepts the rod clamp screw to attach the clamp to the
Detector vertically.
Use to align the clamp vertically.
Functions the same as the Front LCD. See Table 3.
Secures the battery.
Turn clockwise to attach the clamp to the Detector.
Secures and aligns the rod clamp to the Detector in either a
horizontal or a vertical position.
Use to align with the on-grade marks on the Detector for
grade rod readings.
Secures the clamp to a measuring rod or staff.
Medium detection accuracy (1.75 mm)
Fine detection accuracy (0.75 mm)
Detector is too high.
Detector is too low.
Beeper on/off status
Battery level status
Laser beam position
Function
Description