Use The Detector - Fluke LDR User Manual

LDR, LDG
Users Manual
Figure 2 shows how to attach the rod clamp to the Product.
1
Figure 2. Rod Clamp Attachment
6
2

Use the Detector

Use the Detector and the Laser Level to identify new level
and grade marks.
To identify new level and grade marks:
1. Put the bottom of the Laser Level on a stable surface or
tripod.
2. Connect the Detector to a measuring rod or staff.
3. Turn on the Laser Level and the Detector and direct the
laser toward the laser reception window of the Detector.
See Figure 3.
4. Move the Detector up and down the rod until the laser
level on the LCD indicates the Detector is level with the
laser. If the beeper is on, the Detector also emits a solid
output signal when the Detector is level with the laser.
5. Secure the Detector to the rod and take measurements
as needed.
When the Laser Level is mounted on a tripod, make
sure the tripod head is perfectly level. Errors in
marks can result if a tripod is out of level.
Note