Page 1
Installation, Operation and Maintenance Manual High Capacity Carbon Block Filtration System with Quick Turn Filter Replacement Design Model: H2O-DWCB100 WARNING Please read carefully before proceeding with installation. Your failure to follow any attached instructions or operating parameters may lead to the product’s failure.
Installation must comply with state and local plumbing regulations. Maximum Minimum IMPORTANT If you are unsure about installing your WATTS water filter, contact Operating Temperature: 100°F (37.8°C) 40° F (4.4°C) a WATTS representative or consult a professional plumber.
Contents of Under Disconnecting Counter System To disconnect, ensure the system is depressurized before removing the tube. Please make sure all of the items listed below are contained in the Push in collet squarely box. If any of the items are missing please contact retail customer against the face of the service at (888) 321-0500 prior to installing.
Step 2 Blue Tube Connection- Angle Stop Valve - Locate the 3/8"x 3/8" Quick Connect union in the parts bag. Push the union on to the 3/8" stem adapter fitting attached to the faucet hose until fully CAUTION seated. Water supply line to the system must be from the cold water supply line only.
- Follow start-up procedure. To Register your product, please visit www.watts.com/pureh2o and select “Register Now”. Watts is concerned for the safety of your personal information. Watts collects personal information when you register with Watts. This information is stored in our...
Service Record Date of Purchase: _______________ Model Number: _______________ Serial Number: _______________ Date of Install: _________________ Installed by: __________________ High Capacity Quick Turn Carbon filter (12 Months) Page 7...
If any part of this system is found to be defective within the warranty period, return the system after obtaining a return authorization from Watts (see below), and Watts will repair, or at Watts’ option, replace the system at no charge.