Transportation, Transfer, Lifting, Handover, Storage - Siemens GEAFOL Neo Operating Manual

5. Transportation, Transfer, Lifting,
Handover, Storage
5.1 Transportation
According to the packaging requirements of the destination and customers (such as moisture-proof or waterproof), the
appropriate transport and packaging scheme shall be selected. During the transportation process, the products are firmly
placed, and shaking, collision and movement are prohibited. If there are multiple accessory wooden boxes, it is not allowed
to stack more than two wooden boxes to avoid damage to the wooden boxes. The transformer shall be well protected against
rain during transportation to prevent rainwater from wetting the transformer.
Warnings:
• Stacking and Extrusion of Transformer Body Wooden Box.
• Transformers are forbidden to be placed horizontally on transport vehicles. The direction of the transformers should be the same as
that of the vehicles..
• Transport vehicles should avoid sudden braking in the course of moving and should slow down on rough and pitted roads.
5.2 Transfer
When the product arrives at the destination, select the appropriate transfer method according to the loading and
unloading requirements:
5.2.1 If the transformer is packed in wooden cases, the lifting shall be carried out according to the lifting marks on the
wooden cases. Or it shall be transferred according to fork-lift signs, as shown below.
Wooden case packing and transportation Wooden case packing and fork-lift transportation
7