Siemens GEAFOL Neo Operating Manual page 10

5. Transportation, Transfer, Lifting,
Handover, Storage
5.2.2 If the transformer is packed with wooden pallet support, it shall be lifted from the lifting hole of the transformer.
Or shall be transferred according to fork-lift marks, as shown below.
Wooden pallet support packing and lifting
5.2.3 If there is only the transformer body (without packaging), it shall be lifted from the lifting hole of the body, as
shown in the following figure.
8
Wooden pallet support packing and fork-lift transportation
Warnings:
• The lifting process shall be uniform and stable, so as to avoid sudden lifting or landing,
and prevent the transformer from being subjected to external impact.
• When lifting the transformer body, attention should be paid to lifting angle not
exceeding 45.
• For the fork transportation, please pay attention to raising height, avoid unstable
center of gravity, and ensure that no overturning or falling down occurs.