Siemens GEAFOL Neo Operating Manual page 28

10. Appendix
Disassembling diagram of cast resin transformer enclosure
Low voltage outlet cover
Top cover (high-voltage side)
assembly
Crossbeam
(top left and right)
assembly
Column (outer corner) assembly
Crossbeam
(upper end of door) assembly
Stiffening ribs (door pillar)
Crossbeam
(lower end of door) assembly
Crossmember
(front and rear of bottom) assembly
Cover (upper end of door)
assembly
Seal panel (front left)
assembly
Door panel (left)
assembly
Door panel (right)
assembly
Cover (lower end of door)
assembly
Seal panel (front right)
assembly
Door pillar assembly
Bottom seal panel (both sides)
assembly
Remarks:
This image is a standard legend and does not cover all types of enclosures.
26
Crossbeam
(top cover support)
assembly
Bottom seal panel (middle)
assembly
Top cover (high-voltage side) assembly
Top cover (middle) assembly
Cable support
Seal panel (left and right) assembly
Crossmember (right and right of bottom) assembly
Foundation assembly
Crossbeam
(front and rear of top)
assembly
Seal panel
(rear left and right)
assembly
Stiffening ribs
(side columns)
Column (left and right)
assembly