Apex Digital Mobi Mesh Instruction Manual page 23

The ME system is intended for use in the electromagnetic environment specified below.
The customer or the user of ME should assure that it is used in such an environment.
Emissions test Compliance
Emissions
Passed
CISPR 14-1
Passed
Harmonic emis-
sions
IEC 61000-3-2
Voltage fluctua-
tions/Flicker emis-
Passed
sions IEC 61000-3-
3
Declaration – electromagnetic emissions
Electromagnetic environment - guidance
The ME system must emit electromagnetic energy in order to perform its intended function.
Nearby electronic equipment may be affected.
The ME system must be used only in a shielded location with a minimum RF shielding
effectiveness and, for each cable that exits the shielded location, a minimum RF filter
attenuation of 80 dB from 10 MHz to 20 MHz, 100 dB from 20 MHz to 80 MHz and 80 dB from 80
MHz to 100 MHz. (The minimum at 20 MHz is 100 dB and the minimum at 80 MHz is 80 dB.)
The ME system, when installed in such a shielded location, is suitable for use in all
establishments other than domestic and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic purposes.
21
Mobi Mesh / English