Conformity; Compliant With Ce; Compliance With E1; Compliance With Fcc - Danfoss WS103 Technical Information

Technical Information
WS103 Remote Solution

Conformity

Compliant with CE

Compliance with E1

Compliance with FCC

PLUS+1 Compliant
®
© Danfoss | April 2016
This device complies with the directives, standards, and normative documents.
Directive 2014/53/EU on Radio equipment and telecommunications terminal
equipment
Directive 2004/108/EC on Electromagnetic compatibility
Immunity standard for industrial environments (EN 61000-6-2 (2006)
Emission standard for industrial environments (EN 61000-6-3 (2007)
This device has been approved by the KBA (Kraftfahrt-Bundesamt, Federal Office for
Motor Traffic) to comply with Regulation No. 10. ECE Regulation No. 10 (Revision 3,
14/08/2008) Approval No.: 10 R - 047908.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Contains transmitter FCC ID: PVH0965
FCC Part 15/47 CFR Ch I (10-01-2010) Conducted Emission Limits
FCC Part 15/47 CFR Ch I (10-01-2010) Radiated Emission Limits regarding Part 15 of the
FCC-rules (Class B digital devices)
Danfoss Telematics Solutions are compliant with PLUS+1
which allows all PLUS+1 ® Service Tool functionalities to be executed remotely.
Additionally, Danfoss Telematics features are added in the remote interface (machine
information, signal strength, geographical position linked to Google Maps
status, safety mechanism).
® System Control Platform,
™
, CAN
BC00000365en-US0102 | 13