Advertisement
Quick Links
Advertisement
Related Manuals for Dahua Technology IPC-HDBW2249F-AS-IL-0280B
Summary of Contents for Dahua Technology IPC-HDBW2249F-AS-IL-0280B
- Page 1 Dome Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.2...
- Page 2 Quick Start Guide Foreword General This manual introduces the installation and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided,...
- Page 3 Quick Start Guide ● There might be deviations in the description of the technical data, functions and operations, or errors in the print. If there is any doubt or dispute, we reserve the right of final explanation. ● Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
- Page 4 Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements ●...
- Page 5 Quick Start Guide against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. ● Ground the function earthing portion of the device to improve its reliability (certain models are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing.
- Page 6 Quick Start Guide ● Use the accessories suggested by the manufacturer. Installation and maintenance must be performed by qualified professionals. ● Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the lens.
- Page 7 Quick Start Guide Table of Contents Foreword ........................................I Important Safeguards and Warnings ............................III 1 Introduction ......................................1 1.1 Cable ........................................ 1 1.2 Connecting Alarm Input/Output ............................2 2 Network Configuration ..................................4 2.1 Initializing the Camera ................................4 2.2 Changing the Device IP Address ............................5 2.3 Logging in to the Web Page ..............................
- Page 8 Quick Start Guide 1 Introduction 1.1 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid water damage and prevent short circuits from occurring. For details, see the FAQ manual. Figure 1-1 Cables Table 1-1 Cable information Port name Description ●...
- Page 9 Quick Start Guide Port name Description Includes alarm signal input and output ports, the number of Alarm I/O I/O ports might vary on different devices. Table 1-2 Description of alarm I/O port Port Name Description ALARM_IN Receives the switch quantity signal of external alarm sources. ALARM_OUT Outputs alarm signals to alarm devices.
- Page 10 Quick Start Guide Figure 1-3 Alarm output Step 3 Log in to the web page, and then configure the alarm input and alarm output in alarm settings. ● The alarm input on the web page corresponds to the alarm input end of the I/O port. There will be high level and low level alarm signals generated by the alarm input device when an alarm occurs.
- Page 11 Quick Start Guide 2 Network Configuration Device initialization and IP configurations can all be managed with the ConfigTool or through the web page. For more information, see the web operation manual. ● Device initialization is available on select models, and is required at first-time use and after the device is reset.
- Page 12 Quick Start Guide Figure 2-1 Password setting Step 3 Set and confirm the password of the devices, enter a valid email address, and then click Next. Step 4 Select Auto-check for updates as needed, and then click OK to initialize the device. If initialization failed, click to see more information.
- Page 13 Quick Start Guide the first IP entered. ● DHCP mode: If the DHCP server is available in the network, when you select DHCP, the IP address of devices will be automatically obtained through the DHCP server. The same IP address will be set for multiple devices if you select the Same IP checkbox. Step 4 Click OK.
- Page 14 Quick Start Guide 3 Installation 3.1 Packing List ● Tools required for installation, such as the electric drill, are not included in the package. ● The operation manual and information on the tools are on the disk or the QR code. Figure 3-1 Packing list 3.2 Dimensions Figure 3-2 Dimensions: Model A (mm [inch])
- Page 15 Quick Start Guide Figure 3-3 Dimensions: Model B (mm [inch]) 3.3 Installing the Camera 3.3.1 Installation Methods Figure 3-4 Installation methods 3.3.2 (Optional) Installing the SD Card ● SD card slot is available on select models. ● Disconnect the power before installing or removing the SD card. ●...
- Page 16 Quick Start Guide 3.3.3 Attaching the Camera Make sure that the mounting surface is strong enough to hold at least three times the weight of the camera and bracket. Figure 3-6 Cable going through the side cable tray Figure 3-7 Cable going through the mounting surface 3.3.4 (Optional) Installing the Waterproof Connector This part is needed only when a waterproof connector comes with the camera and the camera is used outdoors.
- Page 17 Quick Start Guide Figure 3-8 Install the waterproof connector 3.3.5 Adjusting the Lens Angle Figure 3-9 Adjust the lens angle...
- Page 18 Quick Start Guide 3.3.6 Closing the Camera Figure 3-10 Closing the camera...
- Page 19 Quick Start Guide...
Need help?
Do you have a question about the IPC-HDBW2249F-AS-IL-0280B and is the answer not in the manual?
Questions and answers