Download  Print this page

LG 8815 Quick Start Manual

Hide thumbs
   

Advertisement

Making a Call

Lift the handset. You may press the speakerphone
button or line button to activate the speakerphone.
To use a headset, press the headset button
Dial the destination number. After a short delay, the
IP Phone sends the number, or dial # to send the
dialed digits immediately
When the called party answers, begin speaking, the
LCD displays the elapsed call time

Receiving a Call

To answer a ringing call:
Lift the handset. You may press the speakerphone
button, line button or the Answer softkey to activate
the speakerphone. To use a headset, press the
headset button.
To end the call:
Hang up the handset. If using the speakerphone,
press the speakerphone button. If using the headset,
press the headset button.
To refuse a ringing call:
Press Refuse softkey, the IP Phone stops ringing and
the call server routes the call.
Hold/Resuming a Call
To place a call on hold:
Press the Hold button or the Hold softkey. The call
status changes to hold and you receive dial tone. You
may then select another line to answer or place a
call. Note, if you select an idle line and take no action
for about 15 seconds, the line is disconnected.
To retrieve a held call on a different line:
Press the slow flashing line button.
Select the desired call from the displayed call list
using Previous-Next softkeys
Select the OK softkey to resume a connection with
the call.
To toggle between two calls on the same line:
Press the Hold button or the Resume softkey, the
active call status changes to hold and the held call
connects.
Conference a 3rd party
To set-up a conference:
Place first call as normal.
Press the Conferen softkey. The call status changes
to hold and you receive dial tone.
Dial the number you want to join the conference.
When the party answers, press the Join softkey to
establish the conference.
To end your conference and disconnect all parties:
Hang up the handset.
To cancel a conference, for example the second
party does not answer or is busy:
Press the EndCall softkey.

Transfer a Call

initiate a "Consultative/Supervised" transfer -
To transfer an active call:
Press the Transfer button or the Transfer softkey. The
active call status changes to hold and you receive
dial tone.
Dial the number you wish to receive the transfer.
Await answer and announce the transfer.
Hang-up the handset to complete the transfer.
To cancel a transfer, for example the second party
does not answer or is busy:
Press the EndCall softkey.
To initiate a "Blind" transfer -
To transfer an active call without announcing the transfer:
Press the BlindXfr softkey. The active call status
changes to hold and you receive dial tone.
Dial the number you wish to receive the transfer.
Hang-up the handset to complete the transfer.
To cancel a transfer, for example you mis-dial the
receiving number:
Press the EndCall softkey.
Setting DND
To activate DND:
While the IP Phone is idle, press the DND button.
When active, the DND button LED illuminates red, and
"Do not disturb" displays in the LCD.
To deactivate DND:
Press the illuminated DND button again.
Forward your Phone
You can select one of four (4) conditions that will
forward your calls:
Call Forward Busy - redirects incoming calls if the
line is busy.
Call Forward No Answer - redirects incoming calls
that are not answered in the configured no answer
time.
Call Forward Busy or No Answer - redirects incoming
calls if the line is busy or not answered after the no
answer time expires.
Call Forward All Calls - immediately redirects all
incoming calls.
To set up Call Forward:
Press the CallFwd softkey.
Use the Previous-Next softkeys to select the desired
Call Forward condition.
Press the OK softkey.
Input the destination where you want your calls sent.
Press the OK softkey. The display shows "(x) Fwd to
ext" indicating the forward condition and destination
for the calls.(B) = Busy, (N) = No-answer, (BN) = Busy
or No-answer, (U) = Unconditional
To disable Call Forward:
Press the CallFwd softkey. The message "Fwd to
xxxx" disappears from the LCD.
Muting Your Line
To mute the microphone:
Press the Mute button. The Mute button LED
illuminates red indicating mute is active.
To turn the microphone back on:
Press the illuminated Mute button again.
Setting Speed Dials
Press the desired Speed dial flexible button. The IP
Phone activates the speakerphone and places the
call on your line. You may select a different line
button on your IP Phone prior to selecting the Speed
dial button.
Lift the handset for privacy or press the headset
button to use the headset

Advertisement

Table of Contents
loading

  Related Manuals for LG 8815

  Summary of Contents for LG 8815

  • Page 1: Making A Call

    Making a Call Conference a 3rd party Forward your Phone • Lift the handset. You may press the speakerphone To set-up a conference: You can select one of four (4) conditions that will button or line button to activate the speakerphone. •...
  • Page 2: Quick Start Guide

    • Lift the handset for privacy or press the headset button to use the headset. LG 8815 IP Telephone Quick Start Guide For additional information on the features and layout of the LG8815 IP Telephone Set, please...