Hyundai EXCELLENCE H-CMD4013 Instruction Manual page 12

Setting audio characteristics
Press MENU/SEL button on the panel or on the RC to select the needed sound parameter: L-Front => R-Front
=> L-rear => R-rear => Subwoof => Bass => Middle => Treble => Vol.
The selected parameter can be adjusted by rotating VOL knob or pressing VOL+/- buttons on the RC. If you
don't adjust a setting within 5 seconds after selecting the desired setting, the unit will automatically return to
the current mode being displayed.
LOUD function
Press LOUD button on the RC or on the touchable screen to activate the function of bass amplification. Press
the button again to turn LOUD function off.
Equalizer setting
Press EQ button on the RC or on the touchable screen to select a preset equalizer mode: POP => CLASSIC =>
ROCK => EQ OFF.
General setup
General Setup menu is displayed as follows, when the mode icon (next to the mode name) is pressed on the
touchable screen:
Front
To display the source selection screen. Press the needed item on the screen to select the corresponding source
sound output through the front speaker.
12