Changing The Grinding Disc; Maintenance And Cleaning; Technical Data - Westfalia ZIJ-J2-16TH-D Instruction Manual

Changing the Grinding Disc

1. Make sure, before carrying out any work on the chain saw sharpener, that the
drill machine is switched off and unplugged.
2. First remove the protective cover and remove the grinding disc. Only use
grinding discs with a diameter of 100 mm.

Maintenance and Cleaning

Clean the unit from time to time with a dry paint-brush or a brush in order to
remove grinding residues.
Do not clean the unit with aggressive detergents or aggressive chemicals.
The unit is maintenance-free and does not require any lubrication.

Technical Data

Type
Drive
Shaft-gear neck diameter 43 mm (Euro-Standard)
Grinding Disc Size
Maintenance and Cleaning
ZIJ-J2-16TH-D
Drill machine, clockwise rotation,
with keyed chuck
100 x 3.2 x 10 mm
14