Lexus ES 300h Owner's Manual page 101

100
1-2. Child safety
2
Remove the cover.
3
Check the positions of the exclu-
sive fixing bars, and install the child
restraint system to the seat.
4 After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.100)
■ When using a "LEXUS DUO +" (for
India)
Adjust the seatback angle to the most
upright position.
If there is a gap between the child seat and
the seatback, adjust the seatback angle until
good contact is achieved.
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
Shake the child restraint system left
●
and right, and forward and backward
to ensure that it has been securely
installed.
● After securing a child restraint system,
never adjust the seat.
● When using the lower anchors, be
sure that there are no foreign objects
around the anchors and that the seat
belt is not caught behind the child
restraint system.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
Using an anchor bracket (for top
strap)
Anchor brackets (for top strap)
■
Anchor brackets are provided for the
outboard rear seat.
Use anchor brackets when fixing the
top strap.