Step 1 - Remove Screws And Washers From Front Face; Step 2 - Exchange Chicken Base For Rabbit Base; Step 3 - Insert Locking Bar And Do Up Front Screws - Omlet Eglu Conversion Kit Quick Start Manual

NOTE:
Please take care when tightening and untightening the screws. Be careful not to damage
the head of the screw. TIP - Press hard when screwing and unscrewing.

Step 1 - Remove Screws And Washers From Front Face

a. Remove the two screws and washers in
the front of the front face.
b. Remove the two screws holding the
front face to the base.

Step 2 - Exchange Chicken Base for Rabbit Base

Remove the Chicken Base. At this point
the locking bar will fall free.
Slot the Rabbit Base onto the Front Face.

Step 3 - Insert Locking Bar And Do Up Front Screws

a. Slide the locking bar through the slot.
b. Replace the two screws and washers in
the front of the front face.
a.
a.
b.
Page2
b.