Advertisement
Table of Contents
- 1 What You Have Received
- 2 Other Things You will Need
- 3 Step 1 - Remove Screws and Washers from Front Face
- 4 Step 2 - Exchange Chicken Base for Rabbit Base
- 5 Step 3 - Insert Locking Bar and Do up Front Screws
- 6 Step 4 - Tighten Front Face Screws
- 7 Step 5 - Replace Screws Holding Front Face to Base
- 8 Step 6 - Drill Two Holes for Hay Rack
- Download this manual
Chicken To Rabbit
Eglu Conversion Kit
Omlet Limited
Tuthill Park
Wardington
Oxon OX17 1RR
www.omlet.co.uk
info@omlet.co.uk
Helpdesk: 0845 450 20 56
What you have received
Hay Rack
Water Bottle
Bedding tray
Stabilising Screws
Eglu Pet Base
Feed Bowl
M6 Washers
Guide to keeping rabbits
Front Face Screw
Other things you will need
Around 20 minutes
A Phillips Screwdriver
A 5mm drill bit
Page1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Omlet Eglu Conversion Kit
Summary of Contents for Omlet Eglu Conversion Kit
- Page 1 Chicken To Rabbit Eglu Conversion Kit Omlet Limited Tuthill Park Wardington Oxon OX17 1RR www.omlet.co.uk info@omlet.co.uk Helpdesk: 0845 450 20 56 What you have received Hay Rack Water Bottle Bedding tray Stabilising Screws Eglu Pet Base Feed Bowl M6 Washers...
- Page 2 NOTE: Please take care when tightening and untightening the screws. Be careful not to damage the head of the screw. TIP - Press hard when screwing and unscrewing. Step 1 - Remove Screws And Washers From Front Face a. Remove the two screws and washers in the front of the front face.
- Page 3 You have now finished the conversion and can put the tray, feed bowl, hay rack and water bottle into place. If you have any problems converting your eglu call us on 0845 450 20 56 or email info@omlet.co.uk Page3...
Need help?
Do you have a question about the Eglu Conversion Kit and is the answer not in the manual?
Questions and answers