Page 2
Other things you might need Around 45 minutes to A Phillips Screwdriver assemble your eglu Assembling Your Eglu Step 1 - Find a suitable surface and location in your garden Make sure you assemble the eglu on a spot that is reasonably even and ...
Page 3
How do I use the To join two run panels together, Run Clips? you need to use the Clips supplied. Simply spread the arms and place around the two wires to be joined. squeeze Squeeze the clip and it will close up and join the wires as shown in the diagram.
Page 4
Step 6 - Clip the End Panel on To attach the Run End Panel, line up the centre of the panel with the centre of the run. Put the first clips on each side in the positions shown arrows before putting the rest of the clips on.
Page 5
to prevent it flapping in the wind. If you have any problems assembling your eglu call us on 0845 450 20 56 or email info@omlet.co.uk Guide to Using Your Eglu How to use the Front Door...
Page 6
If you want to move the eglu to a new garden then you will need to take the run apart. Firstly undo the four bolts that hold it to the eglu and then unclip the run. If you lose any clips along the way you can get more by going to www.omlet.co.uk/shop Page6...
Need help?
Do you have a question about the Eglu Classic and is the answer not in the manual?
Questions and answers