Troubleshooting Guide - Philips SBCRU631/87 User Manual

XP SBC RU 631/87 2002
The automatic back-lighting provides you with unparalleled
ease of use, even in the most dimly-lit of rooms. While the
remote control is actively being moved about the back-
lighting stays on. This consumes more power than normal and
may require you to change your batteries more frequently. You
can easily turn the back-lighting function off to conserve
power. To do this please follow the instructions below.
To remove the back-lighting completely:
7 9
Pressing keys 7 and 9 simultaneously again -for about 3
seconds- will return the back-lighting to its preset functional
setting.

TROUBLESHOOTING GUIDE

• Problem:
– Solution:
• Device is not responding and the green light does not flash
– Replace batteries with two new 1.5 volt, type RO3, UM4 or
• Device is not responding, but the green light does flash when
– Aim the SBC RU631 at the device and be sure that there are
• The SBC RU631 is not performing commands properly.
– You may be using the wrong code. Try repeating Set up using
• The SBC RU631 drains batteries more frequently.
– While the remote control is actively being moved around the
• You can't access teletext pages and you were used to use this
– Follow Set up procedure and at step 5 of section "Your
0
0
6
4
8
15-10-2001 12:45
Instructions for use
T i p
• Press keys 7 and 9 simultaneously -for about 3 seconds-
until the green LED flashes twice.
– The back-lighting is now de-activated.
when you press a button.
AAA batteries.
you press a button.
no obstructions between the SBC RU631 and the device.
another code, listed under your brand, or start the Autosearch
Set-up over again to locate the proper code.
If the device still doesn't respond, call the help-line and we'll
put you back on track.
back-lighting stays on. This consumes more power than normal
and may require you to change your batteries more frequently.
You can easily turn the back-lighting function off to conserve
power. To do this please follow the instructions in the
backlighting section.
(fi) button to access teletext.
equipment is of another brand, or your equipment is a Philips
brand, but not all keys respond correctly" press keys
0, 0, 6 and 4. To enter teletext pages, press the subtitle
button.
Pagina 8