SnowEx V-Pro SP-2000 Owner's Manual
  1. Manuals
  2. Brands
  3. SnowEx Manuals
  4. Spreader
  5. V-Pro SP-2000
  6. Owner's manual

SnowEx V-Pro SP-2000 Owner's Manual

Utv hopper spreader
Hide thumbs
Table of Contents

Advertisement

Quick Links

snowexproducts
SnowEx, 531 Ajax Drive, Madison Heights, MI 48071‑2429 • www.
.com
February 15, 2020
Lit. No. 76456, Rev. 03
UTV Hopper Spreader
V‑Pro™ SP‑2000
Owner's Manual
Original Instructions
CAUTION
Read this document before operating
or servicing the spreader.
This manual is for SnowEx
V-Pro UTV hopper spreaders
®
with serial numbers beginning with 160901 and higher.
This manual supersedes all editions with an earlier date.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V-Pro SP-2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SnowEx V-Pro SP-2000

Summary of Contents for SnowEx V-Pro SP-2000

  • Page 1 SnowEx, 531 Ajax Drive, Madison Heights, MI 48071‑2429 • www. .com February 15, 2020 Lit. No. 76456, Rev. 03 UTV Hopper Spreader V‑Pro™ SP‑2000 Owner's Manual Original Instructions CAUTION Read this document before operating or servicing the spreader. This manual is for SnowEx V-Pro UTV hopper spreaders ®...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS PREFACE ..............5 OPERATING THE SPREADER ......14 Owner's Information Form ........5 Cab Control ............14 SAFETY ..............6 Starting and Stopping Motor ......14 Safety Definitions ..........6 Adjusting Auger/Spinner Speed ...... 14 Warning/Caution Labels ........6 Spreading Tips ............

  • Page 5: Preface

    PREFACE This manual has been prepared to acquaint you with When service is necessary, bring your hopper the safety information, operation, and maintenance of spreader to your distributor. They know your spreader your new hopper spreader. Please read this manual best and are interested in your complete satisfaction.

  • Page 6: Safety

    SAFETY SAFETY DEFINITIONS WARNING/CAUTION LABELS Please become familiar with the warning and caution WARNING labels on the spreader. Indicates a potentially hazardous situation that, if not avoided, could result in death or NOTE: If labels are missing or cannot be read, see serious personal injury.

  • Page 7: Serial Number Label

    SAFETY ROTATING AUGER CAN CAUSE SERIOUS INJURY OR DEATH • Keep arms, hands, and loose clothing away from auger. • Shut o control and unplug spreader before servicing. D6335 SERIAL NUMBER LABEL Code Definition 2-Digit Year 2-Digit Month 2-Digit Day 2-Digit Location Code XXXX 4-Digit Sequential Number...

  • Page 8: Safety Precautions

    SAFETY SAFETY PRECAUTIONS CAUTION If rear directional, CHMSL light, or brake Improper installation and operation could cause stoplights are obstructed by the spreader, the personal injury and/or equipment and property damage. lights shall be relocated, or auxiliary directional Read and understand labels and the Owner's Manual or brake stoplights shall be installed.

  • Page 9: Fuses

    SAFETY FUSES FIRE AND EXPLOSION The electrical system contains several automotive-style WARNING fuses. If a problem should occur and fuse replacement Gasoline is highly flammable and gasoline is necessary, the replacement fuse must be of the vapor is explosive. Never smoke while same type and amperage rating as the original.

  • Page 10: Torque Chart

    SAFETY TORQUE CHART CAUTION Read instructions before assembling. Fasteners should be finger tight until instructed to tighten according to the Torque Chart. Use standard methods and practices when attaching spreader, including proper personal protective safety equipment. Recommended Fastener Torque Chart Inch Fasteners Grade 5 and Grade 8 Torque (ft-lb) Torque (ft-lb)

  • Page 11: Loading

    LOADING DETERMINING VEHICLE PAYLOAD This Owner's Manual covers vehicles that have been recommended for carrying the hopper spreader. Please see your local dealer for proper vehicle applications. 1. Install the hopper spreader and optional equipment according to the instructions. WARNING 2.

  • Page 12: Mounting The Spreader

    MOUNTING THE SPREADER MOUNTING THE SPREADER 4. Install the chute/deflector assembly to the spinner assembly using the four 5/16" x 1-1/2" tapping screws and 5/16" locknuts in the supplied NOTE: Periodically throughout the snow and ice hardware kit to complete the drive assembly. control season, verify that mounting devices are secure.
  • Page 13 MOUNTING THE SPREADER 10. Install and tighten all four 1/2" x 3" carriage bolts. CAUTION Before drilling holes, check to be sure that no 11. Install the four ratchet straps as shown below. vehicle wiring or other components could be damaged.

  • Page 14: Operating The Spreader

    OPERATING THE SPREADER – CAB CONTROL Adjusting Auger/Spinner Speed WARNING Never operate equipment when under the 1. Turn the speed dial clockwise to increase influence of alcohol, drugs, or medications that speed. When the POWER switch is set to the might alter your judgment and/or reaction time.

  • Page 15: Spreading Tips

    OPERATING THE SPREADER SPREADING TIPS AUTO‑REVERSE "Ar" FEATURE • Spread ice melters with the storm to prevent 1. If your control displays the "OL" code, this could unmanageable levels of ice. indicate a jammed auger. • Never exceed 10 mph (16 km/h) when spreading. 2.

  • Page 16: Maintenance

    MAINTENANCE STORAGE WARNING Never remove spreader with material in hopper. Store control in a cool dry place during the off-season. At the End of Each Season or After CAUTION Extended Storage Disconnect electric power at spreader electrical wiring harness connection and •...

  • Page 17: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Definition: Switch off & on Control turns ON, Spreader OL Code amperage draw Jammed material for auto-reverse clear jam beeps, shuts OFF, does not run too high function displays error code Bad motor; Contact distributor Test turn shaft by Bad transmission;...
  • Page 18 TROUBLESHOOTING GUIDE Check baffle Material free flows 18" correct Material issue length Should touch Check baffle hopper Material issue position on three sides Material does not Material Remove Material issue flow obstruction obstruction Run 12V to auger Auger runs Auger runs Replace vehicle circuit on spreader proper...
  • Page 20 Do not exceed vehicle ratings with a spreader. TrynEx International offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following are a registered ( ) or unregistered (™) ® trademarks of Douglas Dynamics, LLC: SnowEx , V-Pro™. ® Printed in U.S.A.

Table of Contents