Specifications - Kanto YU6 User Manual

Specifications

YU6 POWERED SPEAKER SYSTEM
Nominal Impedance
Amplifier Type
Power Output
Input Sensitivity
Total Harmonic Distortion
Crossover System
Crossover Frequency
Frequency Response
Speaker Terminals
Input Voltage / Frequency
Standby Power Consumption
Dimensions (each speaker)
Net Weight (Active)
Net Weight (Passive)
Gross Weight
NOTICE: The Bluetooth
Inc. and any use of such marks by Kanto Distribution Inc. is under license.
NOTICE: Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is
a trademark of Qualcomm Incorporated, registered in the United States and other countries, used
with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in
the United States and other countries, used with permission.
NOTICE: This appliance is labeled in accordance with European Directive 2002/96/
EC concerning waste electrical and electronic equipment (WEEE). This label indicates
that this product should not be disposed of with household waste. It should be
deposited at an appropriate facility to enable recovery and recycling.
Supporting your digital lifestyle
Tweeters 1 inch Silk Dome
Woofers 5.25 inch Kevlar
6 Ohm
Class D
200 Watts Peak
560 mV
< 0.3%
2-way
2.0 kHz
50 Hz - 20 kHz
Inputs 1 x 3.5 mm stereo mini-jack AUX
1 x RCA L/R
2 x Optical (Toslink)
1 x Bluetooth
Outputs 1 x Subwoofer
1 x USB Charge Port 5 V 1.0 A
+ and - Binding Posts
AC 100 V - 240 V 50/60 Hz (auto switching)
< 0.5 W
Remote Included
W 6.9"x H 10.7" x D 8.1" (175 x 272 x 205 mm)
11.4 lb (5.2 kg)
8.7 lb (4.0 kg)
24.3 lb (11 kg) (boxed pair)
word mark and logos are registered trademarks owned by Bluetooth SIG,
®
™
4.0 with Qualcomm aptX
®
11